As part of my on going desire to learn and recreate ancient skills and techniques.I thought I'd stick to the "fire" theme (much to Louises delight

) and try to make Rush lights.
For those not familiar with the term,a Rush light is a poor mans candle. Candles were very expensive ,especially beeswax, but tallow was also dear.Rushes would be cut at a certain time of year,99% stripped of its skin,dried and then pulled through animal fats collected in a "Grisset" in the fire place. The Rushlight would be held in a Rush nip,a wooden or Iron stand that lightly clamped the Rush.
A 1.5 foot long rush at an angle of about 20 degrees would only burn for about an hour and needed to be constantly pushed through the nip.If more light was needed the Rush could be moved horizontal for a faster,brighter burn and both ends lit,hence the saying "burning the candle at both ends"
As usual I am going through a steep learning curve in learning this technique. For instance I used the wrong type of rushes first which wouldn't burn.I have now learned about the Rush I require (juncus effusus) I have also sussed out how long to soak the Rushes and roughly how to peel them with my thumbnail,though there is much improvement and practice needed here!!

I have dipped them in molten lard and they work!!

Problem now is that the Rushes should have been collected at the height of summer whilst bright green and with a good strong Pith.The ones I collected yesterday have a disintegrating pith and are no good.
Has anyone else mastered this and got any tips?
Oggie.